BONDED
EDGE SCREENS
(For
spring tensioned or wood frame screening machines).
 |
|
|
|
 |
| BOND
EDGES: Thermal-sealed Tape Edge for finer mesh with
wire size. 011" and smaller. |
|
STA-BOND
EDGES: Thermal sealed Tape Edge for heavier grades of
wire cloth with wire size .012" and larger. |
|
PURE-BOND
EDGES Natural clear plastic edge for use in food processing
operations where FDA approval is required. |
Flynn & Enslow fabricated screen panels are commonly
used in the following industries:
| Minerals:
silica operations, sand and other substances. |
Grain:
sizing and seed cleaning. |
| Rendering:
processing meat and bones. |
Pulp,
paper and wood processing |
| Plastics:
scalping and grading resins. |
Food
Processing: sizing and dewatering. |
|
|
Our
reinforced edging is applied by thermal-sealing the edge
material into the wire cloth. The screen may be stretched
tighter, under greater tension. This results in more production,
less blinding and less screen failure.
When ordering edges, be sure to advise if USFDA acceptable
edges are required. The illustrated edge types are excellent
in applications where unraveling of outer edges of wire
cloth is prevalent and edges need to be reinforced. Other
types of edges are available on request.
We have placed emphasis on edging relating to wire cloth.
However, there are many applications in which perforated
metals are used. These applications are outlined in our
Perforated Materials catalog.
HOW
TO ORDER BONDED EDGE SCREENS
-
SPECIFIC
MAKE OF MACHINE -- Model Number and size.
-
QUANTITY--
Number of pieces
-
SIZE
-- Overall dimensions of screen.
-
OPENING
OR MESH:
- Square
Opening - Specific fractional or decimal space
required.
- Slotted
Opening - Specify fractional or decimal space
required in both opening is parallel to.
- Mesh.
- Specify number of openings of an inch or U.S.S.
steel gauge for steel, stainless or aluminum.
-
WIRE
OR GAUGE -- In decimals of an inch or U.S.S. steel
gauge for steel, stainless or aluminum, (whichever applies).
-
TYPE
OF MATERIAL -- Specify type of material: Plain Steel,
Stainless, Aluminum, Brass, Galvanized, etc.
-
EDGE
PREPARATION -- Canvas, plastic, etc.
Grommets: Please specify material, shape, size and arrangement
of grommets.
-
TOLERANCE
-- If your application requires specific tolerances
for width, length, squareness or similar specifications
it is important to specify while ordering.
-
FURTHER
FABRICATION -- Rolling, forming, shearing, welding,
brazing and similar fabrications are available at the
factory.
-
REPEAT
ORDERS -- When a previous order is to be duplicated,
please give the invoice number, p.o. number and date
of the original order.
 |
|
 |
|
